|
The Plantronics APC-4 Adapter enables remote Headset Hook-switch Control (HHC) with Plantronics wireless headsets CS50, CS55 , CS70, CS70N , CS351, CS351N, CS361, CS361N , 510S, and the Cisco IP phones systems that are listed below. This unit allows you to answer and end calls up to 300 ft. away from your phone. The Plantronics APC-4 Adapter is plug-and-play with the following Cisco IP phones ONLY.
What it has to offer:
Compatible with Cisco IP Phone models ending in model numbers 2 and 5 are compatible (i.e., 7942, 7962, 7945, 7965, 7975 and 7985). In most cases these models will also include a "G" at the end of the model number but it is not required as some phones are marked with the "G" (i.e. 7975G, 7965G, 7945G, 7962G, and 7942G)
Supports Plantronics CS50, CS55, CS70, CS70N, CS351, CS351N, CS361, CS361N wireless headsets systems, and Plantronics Voyager 510S Bluetooth headset system
Enables remote ring alert and call answer/end capability on your Plantronics wireless headset, allowing you to move freely throughout the office without missing a call
Eliminates the need for Plantronics HL10 handset lifter
Double Y cord: plug 3.5mm end into port under wireless headset charging base, and the modular end into the "phone" port - on opposite Y end plug smoky color modular end into headset port of Cisco phone; plug the other modular end into auxiliary port of Cisco phone
HHC software functionality must be enabled though Cisco Unified Communication Manager Administration application
Once connected, the HHC will send a ringer alert signal to the headset anytime the phone rings, anywhere within a headset's wireless range
Upon hearing the signal, the headset wearer presses the call control talk button on the headset to answer the call remotely
To end a call, press the call control button on the headset - the phone will go off and on-hook electronically
Cable is approx. 4 feet long
|
Condition of Use 
OFFICE HEADSETS->
WIRELESS HEADSETS->
